View Single Post
Old 17th Nov 2017, 10:19 am   #1
Keith
Heptode
 
Keith's Avatar
 
Join Date: Jan 2003
Location: Tewkesbury, Gloucestershire, UK.
Posts: 689
Default R209 - BFO injection

Does anyone have experience using this receiver? A recently acquired example seems to work fine on AM, but when switched to CW the BFO injection is very weak, requiring the gain to be turned down significantly. This results in a low level of audio output. It would be useful to know if this was a design "feature" or whether there is a fault present.
__________________
Keith Yates - G3XGW
VMARS & BVWS member http://www.tibblestone.com/oldradios/Old_Radios.htm

Last edited by Keith; 17th Nov 2017 at 10:22 am. Reason: Grammar correction
Keith is offline