Re: 232L bakelite telephone and No 26 Bellset
russell
I have paired my units as follows.
Bellset:-
I removed all links
connected resistor between term 8-9
connected white of plug cord to term 2
connected blue of plug cord to term 9
red cord unconnected
Plugged this arrangement into wall socket after connecting as follows.
232L telephone to bellset (Connected with 4 core handset cord)
Red T3 to B5
White T1 to B7
Blue T2 to B3
Green unconnected
When plugged in phone has no dialling tone
Rang number with my mobile
Bellset rang, but on lifting receiver line dead and bellset continues ringing.
The handset cord on my 232L is a modern curly cord type.
Would appreciate your guidance.
Ivan
I'm not very good at reading diagrams so I have not done anything with the rectifier
|