View Single Post
Old 4th Apr 2019, 3:34 pm   #74
ms660
Dekatron
 
ms660's Avatar
 
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 9,180
Default Re: Ferrograph 4A: Restoration advice needed

Quote:
Originally Posted by Uncle Bulgaria View Post
I don't suppose there's any easy way to check for squareness against the top-plate.
When I worked for Sony I used to use an engineered 90 degree block as a guide for the zenith adjustment, it was designed to go right up to the head surface provided there was room on the deck plate for it to sit on. In cases where that wasn't possible I used the reflected light trick as per this Sony manual (last para in manual page 28 and the drawing in manual page 29):

https://elektrotanya.com/sony_tc366_.../download.html

Lawrence.
ms660 is online now   Reply With Quote