Re: Two or three IF stage Chinese radio kits.
For the phase-splitter you can't use a LT44-type driver transformer as that only has a single centre-tapped winding which won't work with a "totem pole" no-output-transformer stage.
Going to the "classic" push-pull ttransistor amp using LT44 and LT700 transformers would be better - at least that way each transistor has the full 3V of battery-voltage to work with.
[I've always had a weakness for the little 2-transformer push-pull transistor output stage; I built a lot of these as a kid - initially the little few-hundred-milliwatts versions using the likes of OC72 or OC81 transistors, then moving up to bigger stuff using OC35s in parallel to get 25 Watts or so...]
|