View Single Post
Old 11th Dec 2006, 5:32 pm   #3
Welsh Anorak
Dekatron
 
Welsh Anorak's Avatar
 
Join Date: Apr 2005
Location: North Wales, UK.
Posts: 6,925
Default Re: Phillips k35-Dead on start up

Hi
Check the chopper transistor isn't short - it doesn't blow the fuse if it is, unusually. Then suspect the TDA chopper control IC on the power board (second one in). As the set isn't tripping, I'd expect the fault to be very near to that IC.
Good luck!
Glyn
Welsh Anorak is offline