UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Dekatron · 21st Jan 2018, 4:28 pm

Thanks Alf!

You should be able to use both the original component list plus the extra component list for the small LR8 PCB I made, I used the same component numbers on the combined main PCB (unless I made some error).

Since I am not the designer of this tester and neither have I read all of the posts in this thread so I can't say anything on the voltage regulators for the 1.4V and 2V. Maybe someone else can step in here?

21st Jan 2018, 4:28 pm	#1467
Dekatron Octode Join Date: May 2009 Location: Linkoping, Sweden Posts: 1,465	Re: The "Sussex" Homebrew Valve Tester. Thanks Alf! You should be able to use both the original component list plus the extra component list for the small LR8 PCB I made, I used the same component numbers on the combined main PCB (unless I made some error). Since I am not the designer of this tester and neither have I read all of the posts in this thread so I can't say anything on the voltage regulators for the 1.4V and 2V. Maybe someone else can step in here? __________________ Martin, Sweden