Re: Kodak Carousel slide-projector - remote-control?
I am not sure how standardised the remote controls were across the Carousel range (my guess is that they were), but the pinout I have for the 6 pin DIN socket is :
1 : change reverse
2 : change forwards
3 : +ve supply
4 : focus motor
5 : focus motor
6 : -ve supply
The slide change buttons are wired between +ve (pin 3) and pin 1 or pin 2 as appropriate. The focus switch is essentially a centre-off DPDT thing wired as a reversing switch. Inputs from +ve and -ve (pins 3 and 6), output to the motor (pins 4 and 5).
And yes the wired remote control is just switches.
|