Quote:
Originally Posted by rambo1152
I've just been reading through your various trials and tribulations on
http://www.taswegian.com/NBTV/forum/...hp?f=15&t=3143
and I got to the point where one or (worse) both of your monitors were blank because the graphics card was outputting a TV mode and a reboot didn't change the resolution, and you were contemplating reinstaling the entire OS...
...STOP, Windows Safe Mode is your freind (tap F8 while reboting) that will give you a picture of sorts on your screens.
|
If i get into trouble again i will sure try it i think i reinstalled winds a fair few times !
Its very well behaved at the moment working every time so i am careful not to change display settings now that it works ,the main problem was i think i have 2 different brand monitors twice as much trouble
but worked it out and they are very happy where they are ! my mistakes might help others . I have not got to the point of Trying my own mode lines but i came across this site
https://www.epanorama.net/faq/vga2rgb/calc.html
i would if this would be of use not tried it yet .