View Single Post
Old 28th May 2022, 3:59 am   #32
dalekmoore2007
Pentode
 
Join Date: Aug 2008
Location: Melbourne, Australia
Posts: 213
Default Re: Modeline experiments

After a few more go's every thing looks good i think also because i have different brand monitors that's a factor that was stuffing me up a bit pretty much going to mark the vga plugs to the monitors and in and out of the graphics vga plug sockets that will make life easier if i have to unplug this and put it back together.
Now what works and what doesn't as far as modelines i have tried
All your mode lines Graham you kindly posted work great no problems, also below is the list off my modeline menu and some others i found scattered on this forum they work too.
Modeline "664x377_25 10.1kHz 50.0Hz" 8.100 664 680 752 800 377 379 385 405 interlace -hsync -vsync
Modeline "560x220_25 6.0kHz 25.0Hz" 3.750 560 568 584 624 220 221 233 240 -hsync -vsync
Modeline "656x383_25 11.0kHz 50.0Hz" 8.820 656 665 744 800 383 384 392 441 interlace -hsync +vsync
Modeline "640x540_25 15.6kHz 50.0Hz" 13.620 640 694 758 872 540 556 562 625 interlace -hsync -vsync
Modeline "570x456_30 15.7kHz 59.9Hz" 12.080 570 621 678 768 456 472 478 525 interlace -hsync -vsync
Modeline "1500x580_25 15.6kHz 50.0Hz" 26.880 1500 1508 1605 1720 580 582 596 625 interlace -hsync -vsync
Modeline "1500x100_25 2.7kHz 25.0Hz" 8.020 1500 2828 2938 2999 100 103 105 107 -hsync -vsync
Modeline "1152x738_25 20.5kHz 50.0Hz" 29.320 1152 1168 1240 1432 738 744 745 819 interlace -hsync +vsync
I had trouble having 120 line in this list at first but works after pasteing the mode line after the others were rebooted to work ,thats one of Peter Scotts
Modeline "1500x100_25 3.0kHz" 8.840 1500 2828 2938 2948 100 105 110 120 -hsync -vsync
Now what i also wanted but doesn't work so far i am interested in can't seem to get this one going if any one see's a mistake in the modeline
Modeline "900x180_25 4.5kHz 25.0Hz" 4.050 664 728 784 900 170 172 176 180 -hsync -vsync
There are others but pretty much same line frame rates with different modeline settings
Testing the results on the scope
as in list above
Line H V
405 10.12khz 50hz
240 12.82khz 53.44 hz
441 11.04khz 50hz
625 15.65khz 50hz
525 15.70khz 59.79hz
625 1500x580........15.60khz 49.92hz
107 2.674khz 25hz
819 20.52khz 25hz
120 2.677khz 25hz

Like 180 line going if any one can help
dalekmoore2007 is offline