UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - AZ31 as rectifier for a stereo Mullard 3-3?

Diabolical Artificer · 13th May 2021, 6:04 am

Chassis ground like 0v & screen from tfmr all to one point near C1 or 1st big filter cap,then a bus bar goes to that too. Next in this order onto the busbar, OP stage, phase splitter if any, then IP stage & IP from RCA in. the idea being to keep high current grounds away from sensitive IP stages.

Andy

13th May 2021, 6:04 am	#22
Diabolical Artificer Dekatron Join Date: Jul 2009 Location: Sleaford, Lincs. UK. Posts: 7,670	Re: AZ31 as rectifier for a stereo Mullard 3-3? Chassis ground like 0v & screen from tfmr all to one point near C1 or 1st big filter cap,then a bus bar goes to that too. Next in this order onto the busbar, OP stage, phase splitter if any, then IP stage & IP from RCA in. the idea being to keep high current grounds away from sensitive IP stages. Andy __________________ Curiosity hasn't killed this cat...so far.