View Single Post
Old 20th Feb 2020, 11:49 am   #5
simpsons
Octode
 
Join Date: Feb 2007
Location: Harrow, London, UK.
Posts: 1,483
Default Re: Advice on HDMI to RF converter

Looking at the eBay.com site, the RF output is shown as 61.25 Mhz. The UK reference is to the mains plug supplied. In addition, the instructions show that the RF frequency is fixed.

There are inexpensive HDMI to composite converters and in addition RF modulators or perhaps you could use a video recorder to do the modulator part.

I've used both Amazon £10 and £30 converters and noticed that setting PAL/NTSC has quite an effect on the quality of conversion. If memory is right, the NTSC comb filter gave a much better frequency response when using a test card input.

Good luck

Chris
simpsons is offline