UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Help Pls = Grundig TK64 Motor Not running

Phantomrose1999 · 24th Nov 2018, 9:24 am

Well, its another day and i spent most of on this Grundig TK64.

The problem is i cant find a schematic with motor connection diagram to match the unit i have. So some guess work.

PLEASE SEE attached details of me tracing the wires and substituting another cap in the place i though it should go, but still no luck..

1) Is the attached diagram / photos accurate ? its based on me tracing the wires

2) Where should the cap be connected ? from the middle wire to the Relay side OR the mains fuse side ?

3) I tried to connected a new cap between the middle motor wire (after isolating it) and the Relay side input power, but it still would not start the motor.

If i knew exactly which wires from the motor matched the schematic, i would just make some direct connections and bypass the 50/60 hertz switches.

24th Nov 2018, 9:24 am	#2
Phantomrose1999 Hexode Join Date: Mar 2008 Location: Melbourne, Victoria, Australia Posts: 289	Re: Help Pls = Grundig TK64 Motor Not running Well, its another day and i spent most of on this Grundig TK64. The problem is i cant find a schematic with motor connection diagram to match the unit i have. So some guess work. PLEASE SEE attached details of me tracing the wires and substituting another cap in the place i though it should go, but still no luck.. 1) Is the attached diagram / photos accurate ? its based on me tracing the wires 2) Where should the cap be connected ? from the middle wire to the Relay side OR the mains fuse side ? 3) I tried to connected a new cap between the middle motor wire (after isolating it) and the Relay side input power, but it still would not start the motor. If i knew exactly which wires from the motor matched the schematic, i would just make some direct connections and bypass the 50/60 hertz switches. Attached Thumbnails