UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

OldTechFan96 · 20th Nov 2017, 7:22 pm

I've been able to order the components I require through Cricklewood Electronics.

When measuring the resistance between the anodes of V2 and V3 my DMM's reading fluctuates a bit then settles on .02 ohms. When I test for continuity my DMM beeps.

When I measure the resistance between the uppermost and lowermost points of the O/P transformer my DMM reads O/L.

I'll do some more readings later on and report back.

20th Nov 2017, 7:22 pm	#12
OldTechFan96 Octode Join Date: Jul 2017 Location: Newcastle Upon Tyne, Tyne & Wear, UK. Posts: 1,178	Re: Pye Black Box Restoration I've been able to order the components I require through Cricklewood Electronics. When measuring the resistance between the anodes of V2 and V3 my DMM's reading fluctuates a bit then settles on .02 ohms. When I test for continuity my DMM beeps. When I measure the resistance between the uppermost and lowermost points of the O/P transformer my DMM reads O/L. I'll do some more readings later on and report back.