HI All, after testing with an AVO 8 meter there was not volts on AC or DC. On the Digital Meter there was over 100 Volts AC and about 20 DC.
I dismantled the meter to make sure it was not the brushes. I cleaned the commutator and still not connecting between the two stators. Then decided to pull it apart.
The winding is Open Circuit...….between these winding points.
Sadly it is not the Easy one to get at. I guess it is the one that comes up by the side of the stator...…..
Not sure what's next
Just thought I would let you all know
Regards