Re: Help with Braun MT99R
I would think that is the most likely arrangement. The 2 resistors and the capacitor should be close to the cartridge, in which case the OP does not have them. The tape socket is definitely the black DIN 3 pin, connected to resistors W31,W32 & W33. The pickup will be between chassis and switch contact B1.
Potentiometer W40 looks to be a very trick item with 2 taps.
The 4 sockets in line on the left of the chassis rear are from left to right, earth (signal, not mains), AM aerial, 2 for 240 ohm twin feeder FM aerial.
|