View Single Post
Old 2nd Dec 2020, 1:43 pm   #16
Join Date: Mar 2020
Location: Bodmin, Cornwall, UK.
Posts: 147
Default Re: VCM 163 problem while calibrating

Voltage measured across 3 and 6 on the amplifier board is 11.64 DC
Voltage measured across 1 and 2 on the oscillator board is 24.6 rms
All the capacitors checked ok on the amplifier board. Should C1 be 1uf? On the circuit diagram it looks to be marked 1.99uf.
I will check the oscillator board this afternoon.
HBWOODY is offline   Reply With Quote