View Single Post
Old 22nd Apr 2021, 6:15 pm   #1721
ajgriff
Octode
 
ajgriff's Avatar
 
Join Date: May 2004
Location: Halifax, West Yorkshire, UK.
Posts: 1,870
Default Re: Non-working Commodore PET 3016

Quote:
Originally Posted by ScottishColin View Post
None of the three datasettes get any power from the PET port 2 - where can I start checking for power please?
Power is supplied to the datasette via the two contacts either side of the key slot on the PET board. One supplies the motor and the other the electronics. Check the voltages with respect to ground in each case and report back.

Alan
ajgriff is offline   Reply With Quote