View Single Post
Old 26th Mar 2020, 11:24 pm   #5
jimmc101
Heptode
 
jimmc101's Avatar
 
Join Date: Mar 2009
Location: Portsmouth, Hampshire, UK.
Posts: 674
Default Re: Computron monochrome raster display

Thanks for that, I shall have to try and make up an extension cable so that I can run the display out of its housing.
It's either that or program a microprocessor to provide sync pulses.
I've found elsewhere in the manual that V sync is a 19.608kHz square wave.
I can't find V sync but it doesn't matter it's shorted out by the link across C116A . (This is a deliberate mod listed elsewhere on the schematic.)

Jim
jimmc101 is offline