View Single Post
Old 5th Aug 2012, 10:13 am   #2
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: A pictorial guide to servicing the Collaro Studio autochanger

Remove the circlip around the centre of the turntable and lift off the turntable.


Click image for larger version

Name:	collaro studio 002.jpg
Views:	2064
Size:	54.0 KB
ID:	69372
Remove the single screw holding the turntable idler and lift off the idler wheel.

Remove the two screws holding the larger cycle change wheel and lift it off. Note some force may be needed, its usually very tight. take care not to damage it.

Remove the single nut on the switch and lift off the cover.

Carefully unsolder the yellow wire Click image for larger version

Name:	collaro studio 004.jpg
Views:	756
Size:	143.5 KB
ID:	69373

The green wire will also need to be removed but you have to unscrew it from the connector block underneath first.

Remove the operating and speed change knobs.

The operating knob pulls off, the speed change knob is held by a circlip.
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline