Re: Tape Speed Control Stuck on UHER 4000 Report IC.
Which model are you talking about? If it's the 4000.4200/4400IC series you don't have to remove the front panel to get at the speed change. You take off the bottom and open up the hinged circuit board. Then you can see what the BBC have done...if they have done anything. As I have said above you can't lock the speed knob on the IC models and there is no information on the internet about the BBC modifying the speed change on this model.
Last edited by barretter; 5th May 2019 at 2:01 pm.
Reason: Used the wrong word
|