View Single Post
Old 9th Feb 2019, 1:11 am   #13
martin.m
Hexode
 
martin.m's Avatar
 
Join Date: Mar 2018
Location: Bishop Auckland, County Durham, UK.
Posts: 251
Default Re: Confusion over DIN sockets

Thank you Trigon, you have cleared up my confusion. I didn't realise the "links" on the circuit diagram were switch contacts. Paul, you are correct. The "radio/diode" socket does have an input and an output. There are 3 inputs in total. A low level microphone input, a high level input potted down by a 1M and 22K resistor and another input potted down by two 22K resistors. There is also an output from the anode of the ECL86 audio amp triode that goes via a 0.1uF cap and is attenuated by a 220k and a 15k resistor. Thanks again to everyone who has replied.

Regards
Martin
Attached Thumbnails
Click image for larger version

Name:	Grundig TK14 input circuit.jpg
Views:	67
Size:	85.7 KB
ID:	178071   Click image for larger version

Name:	Grundig TK14 DIN sockets.jpg
Views:	52
Size:	93.1 KB
ID:	178072  
__________________
Regards
Martin

Last edited by martin.m; 9th Feb 2019 at 1:14 am. Reason: Punctuation
martin.m is offline