View Single Post
Old 3rd Feb 2019, 3:21 pm   #19
Station X
Moderator
 
Station X's Avatar
 
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 15,001
Default Re: Volume fault ? Trio 9R 59D

Quote:
Originally Posted by Humptydumpty View Post
Graham no reading from outer tags 1 and 3
In an earlier post you said that you were using an analogue meter, so I assume that by "no reading" you mean that the needle is sat at the left hand end of the scale indicating open circuit?

What meter range are you using? For example ohms X100.

What's the max resistance you measure between tags 2 and 3 before the reading goes to open circuit.

As I've said before we need values.

I get a reading on my kitchen scales. Meaningless.
I get a reading of 10 on my kitchen scales. Meaningless.
I get a reading of 10 ounces on my kitchen scales. Meaningful.
__________________
Graham. Forum Moderator

Keep the soldering iron hot.
Station X is offline