View Single Post
Old 14th Nov 2018, 10:47 pm   #1
PortugalTV
Triode
 
Join Date: Nov 2018
Location: Serzedo, Portugal.
Posts: 36
Default Capacitor restuffing

hi
this is main filter capacitors restuffing on an old battered high hours TV
the tv is a "Ponto azul" wich is a Portuguese knock-off of Blaupunkt
it is an all vacuum tube black and white set with a 110 crt
i dont have a schematic but i managed to ressurect this old gem
it had a bad flyback high voltage winding and i replaced it with one from an American Tv that i bought off ebay.
the high voltage is a bit low due to the different HV winding and the picture blooms when the brightness is maxed out, the crt has a burn in the center but it is still good to watch some movies.
the linearity and h-size is screwed up no matter how i adjust it but i will not touch that until i find a schematic. all original caps and resistors except the filters wich were physically leaking electrolite

here is a photo of before and after on the filter caps and a video with raw footage of the process..
i need to take better pics of the tv , the picture is better than it appears on my cell phone camera

https://www.youtube.com/watch?v=UMVBnl_nm5g
Attached Thumbnails
Click image for larger version

Name:	1.jpg
Views:	123
Size:	24.2 KB
ID:	172841   Click image for larger version

Name:	WP_20181104_14_05_00_Pro.jpg
Views:	143
Size:	56.8 KB
ID:	172842   Click image for larger version

Name:	WP_20181013_20_41_11_Pro.jpg
Views:	143
Size:	39.5 KB
ID:	172843  

Last edited by PortugalTV; 14th Nov 2018 at 11:04 pm.
PortugalTV is offline