UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Boater Sam · 7th Jan 2014, 10:26 pm

Here are two scans, a cleaned and prepped VHF90 and a scan of the control panel on a Roberts R300.

The Roberts panel probably will fit other models. They tend to get discoloured, this scan can be printed on sticky film to recover the original.
It was very difficult to scan due to the upturned edges spacing the panel away from the scanner glass.

Sam.

7th Jan 2014, 10:26 pm	#34
Boater Sam Banned Join Date: Dec 2013 Location: Middlewich, Cheshire, UK. & Winter in the Philippines. Posts: 3,897	Re: Useful tuning scale and label scans etc Here are two scans, a cleaned and prepped VHF90 and a scan of the control panel on a Roberts R300. The Roberts panel probably will fit other models. They tend to get discoloured, this scan can be printed on sticky film to recover the original. It was very difficult to scan due to the upturned edges spacing the panel away from the scanner glass. Sam.