18th Aug 2006, 12:11 pm
|
#12
|
Dekatron
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,580
|
Re: Bodge-o-tronic: Veroboard!
Quote:
Originally Posted by Nickthedentist
Break any tracks with the correct tool, and then inspect each break under good lightling conditions. Sometimes, if the holes are slightly off-centre with respect to the track, the break will be incomplete. If so, refine it with a craft knife. - After assembly, run a small jewellers screwdriver between every single strip, to rake out any flux or solder splashes.
Nick .
|
I've used Veroboard for years and these two points should be second-nature when using it.
Rich.
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman.....
|
|
|