UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

GSBX1220 · 2nd Aug 2020, 11:03 am

Hi

I'm using it with my Jetgard headset via my Datong ASP speech processor. The bias voltage I'm feeding it with (to be on the safe side) is 3v. I could not find any specs on the mic.

The headset came with the dynamic insert, but the output from the dynamic insert was too low to drive the processor. The electret drives the processor fine and I have not had any complaints on air!

Cheers.

2nd Aug 2020, 11:03 am	#4
GSBX1220 Pentode Join Date: Jun 2018 Location: Glasgow, Scotland,UK. Posts: 127	Re: Racal Acoustics Microphone ID req Hi I'm using it with my Jetgard headset via my Datong ASP speech processor. The bias voltage I'm feeding it with (to be on the safe side) is 3v. I could not find any specs on the mic. The headset came with the dynamic insert, but the output from the dynamic insert was too low to drive the processor. The electret drives the processor fine and I have not had any complaints on air! Cheers. __________________ Richard