View Single Post
Old 14th Feb 2021, 3:36 am   #20
bionicmerlin
Heptode
 
bionicmerlin's Avatar
 
Join Date: May 2010
Location: Warminster, Wiltshire, UK.
Posts: 682
Default Re: Bush TV 12B To restore or not to restore advice please

What I do is take photos . Check on diagrams . Find out what each component does. Bit of a learning curve for me.
As I cut the old component out I mark the tag with a black felt tip pen. When I re solder the pen mark disappears when the old solder melts. Then move on to the next..
I would normally do a couple components at a time ,but It’s not practical to keep talking out the bottom rf panel each time and more likely in the end to damage something. Andy
__________________
I bet that car doesn't have a suppressor.
bionicmerlin is offline