View Single Post
Old 26th Feb 2021, 7:54 pm   #687
Mark1960
Octode
 
Join Date: Mar 2020
Location: Kitchener, Ontario, Canada
Posts: 1,265
Default Re: Non-working Commodore PET 3016

Quote:
Originally Posted by ScottishColin View Post
The trigger options are as follows:

Sweep: Auto/Normal/Single
Slope: Rise/Fall

Colin.



There is other open-source software (Openhantek) that I could look into if this doesn't give us what we need.
No need to try and change the software.

Try changing sweep to Normal. The trace should then not display unless it is detecting the trigger.

For slope select Fall.

Try one more time with these settings at 20 us per division.
Mark1960 is offline