UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Tektronix 465b oscilloscope CH1 & 2 issues

Andrewausfa · 4th Jul 2019, 10:46 pm

This very interesting thread reminded me, or rather gave a whack over the head, that I need to take a better look at the three 465s I have. One is ex-BBC with the old '70s BBC TV logo stamped into the case and broadly works. One I think I stuck power up and something oscilloscopey happened or possibly not. One seems bereft of life.

I may need your advice on one in particular that has a board with burnt components on that is in neither early or late manual though it has the correct Tek part number on the board for the position it's in. For another day at the moment though.

Andrew

4th Jul 2019, 10:46 pm	#70
Andrewausfa Octode Join Date: Dec 2010 Location: St Ives, Cambridgeshire, UK. Posts: 1,180	Re: Tektronix 465b oscilloscope CH1 & 2 issues This very interesting thread reminded me, or rather gave a whack over the head, that I need to take a better look at the three 465s I have. One is ex-BBC with the old '70s BBC TV logo stamped into the case and broadly works. One I think I stuck power up and something oscilloscopey happened or possibly not. One seems bereft of life. I may need your advice on one in particular that has a board with burnt components on that is in neither early or late manual though it has the correct Tek part number on the board for the position it's in. For another day at the moment though. Andrew __________________ Invisible airwaves crackle with life. Or they should do. BVWS Member