UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

linescan87 · 13th Jun 2019, 9:27 pm

Hi All,

I recently got this set in Wexford, a 300 mile round trip but ok as I have family not far from were I collected it. They had unfortunately powered it up, but it showed a raster in the pictures online. When I got it up on the bench and powered up it was pumping straight away. My first thought was the tripler, I disconnected it's input from the lopt and she came up. I have wired in a tripler for now but I'm getting a slightly negative voltage on the A1's.

I've no manual so I'm shooting in the dark, though I haven't found anything obvious on the line out panel. I hope it's not the lopt. My friend John has jetted off to the States to visit his daughter so no help there. Any clues on this lads? I've put an ad in the wanted section for a diagram or any helpful service information.

Thanks,
John Joe.

https://youtu.be/sKUT73DS5uM

13th Jun 2019, 9:27 pm	#1
linescan87 Heptode Join Date: Mar 2014 Location: Meath, Ireland Posts: 551	Autovox 2682. Hi All, I recently got this set in Wexford, a 300 mile round trip but ok as I have family not far from were I collected it. They had unfortunately powered it up, but it showed a raster in the pictures online. When I got it up on the bench and powered up it was pumping straight away. My first thought was the tripler, I disconnected it's input from the lopt and she came up. I have wired in a tripler for now but I'm getting a slightly negative voltage on the A1's. I've no manual so I'm shooting in the dark, though I haven't found anything obvious on the line out panel. I hope it's not the lopt. My friend John has jetted off to the States to visit his daughter so no help there. Any clues on this lads? I've put an ad in the wanted section for a diagram or any helpful service information. Thanks, John Joe. https://youtu.be/sKUT73DS5uM Attached Thumbnails Last edited by linescan87; 13th Jun 2019 at 9:33 pm.