Re: "That" capacitor on a Murphy A262
Hi Paul. Full circuit here: http://www.******************************/A262.jpg
Murphy did tend to use a low value capacitor at this point. I found that increasing the value in my A684 actually helped remove some troublesome hum. An 0.047uF should be fine in this position.
Here's the A684 so you can compare it: http://www.******************************/A674.jpg
Best regards, Paul
Last edited by Darren-UK; 20th Jul 2007 at 2:50 pm.
Reason: Removed reference to another, now deleted, thread.
|