View Single Post
Old 19th Jan 2022, 7:49 pm   #4
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 7,401
Default Re: Eddystone friction drives

Hi Gents, not much play in the main bearing now the bush is in the correct position.

It does not appear to be an eccentric bush for adjustment, but there is some clearance on the case holes where the bush clamping screws fir through. It is however pushed fully over and is still slipping badly.
Gearbox appears quite free

Ed_Dinning is offline   Reply With Quote