UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Tandberg Series 15. No sound on playback position. help please

jascha · 31st Jul 2019, 5:07 pm

Here are 2 images of both sides of the switch. I have cleaned it thoroughly in the meantime and will check for any broken connections between head cables and pre amp board. I have noticed that hiss levels are higher on the amplifier mode than playback mode, however there is still some background noise in playback mode.

Thanks again

31st Jul 2019, 5:07 pm	#4
jascha Hexode Join Date: Nov 2005 Location: Kent, UK. Posts: 332	Re: Tandberg Series 15. No sound on playback position. help please Here are 2 images of both sides of the switch. I have cleaned it thoroughly in the meantime and will check for any broken connections between head cables and pre amp board. I have noticed that hiss levels are higher on the amplifier mode than playback mode, however there is still some background noise in playback mode. Thanks again Attached Thumbnails