View Single Post
Old 15th Feb 2018, 7:46 pm   #21
llama
Octode
 
llama's Avatar
 
Join Date: Jun 2006
Location: St Osyth, Nr Clacton, Essex, UK.
Posts: 1,482
Default Re: Simple method to mark calibration and functions externally on a case?

Back in the '70s I would matt black spray the panel, Letraset it, then cover with clear Fablon.

My most recent effort (for a WS-38) has been to simply draw the panel with lettering using MS-Paint. Save it as a JPEG onto a USB memory and take that to the print-it-yourself photo printer at a supermarket. The photo costs a few pennies and can look very professional. Yes, a few trials might be needed but at these prices it's worth it. Several sizes of "photo" are available and you need to be careful whether to include a margin or not.

For my job I'm not sure the sharp edge of the photo is good enough but I may be able to smooth it and cover the white edge.
Graham
__________________
Half my stuff is junk - trouble is, I don't know which half!
llama is offline