Quote:
Originally Posted by 60 oldjohn
Quote:
Originally Posted by 60 oldjohn
[
Also worth mentioning, when removing the two screws that secured the chassis both were reasonably slack. But one took a massive force as the spring washer was scoring deep into the radio bracket. I have lost the filling that it cut out of the chassis but have taken photos. I did try easing the washer with a thin screwdriver but that did not work, it kept biting for about 1.5 turns.
|
I've managed to get the photos. In future I think I will be using a flat washer instead.
John.
|
Wavey or Crinkle washers work well and are a bit kinder on the mating surfaces.
John