UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Michael Maurice · 11th Sep 2019, 8:36 pm

There is a small spring wire under the deck near where the spindle is located, you have to move that wire out slightly and then pull the spindle out, if it won't Budge then heat it up before pulling it up

11th Sep 2019, 8:36 pm	#19
Michael Maurice Moderator Join Date: Feb 2006 Location: Wembley, Middlesex Posts: 7,225	Re: Dansette Dilemma There is a small spring wire under the deck near where the spindle is located, you have to move that wire out slightly and then pull the spindle out, if it won't Budge then heat it up before pulling it up __________________ Forum Moderator http://www.michaelmauricerepairs.co.uk/