UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

maginot · 3rd Mar 2013, 5:38 am

Hi,

I have a 7600DA model and already replaced the DC converter related caps. It should generate 17.5V but I can only get around 1.5V after turning on the radio which decays down to 0.5V. Would be very grateful for any other ideas (apart from replacing the caps)? Presumably the oscillator is not working correctly but which component is key to triggering the oscillator that could be at fault?

many thanks

3rd Mar 2013, 5:38 am	#15
maginot Retired Dormant Member Join Date: Mar 2013 Location: Tokyo Japan Posts: 1	Re: Sony ICF SW7600 Hi, I have a 7600DA model and already replaced the DC converter related caps. It should generate 17.5V but I can only get around 1.5V after turning on the radio which decays down to 0.5V. Would be very grateful for any other ideas (apart from replacing the caps)? Presumably the oscillator is not working correctly but which component is key to triggering the oscillator that could be at fault? many thanks