UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Thandar Function Gen Cutout Mains transformer

llama · 17th Jun 2016, 6:50 pm

Thanks Kevin, that's great. Yes I can see the device at the surface.

I should have mentioned that the split secondary winding measures 3.8 Ohms one half and 4.4 Ohms the other half. That sounds a bit too much difference to be accounted for by one being wound over the other so I wonder is there are shorted turns in the 3.8 Ohm winding.

Graham

17th Jun 2016, 6:50 pm	#3
llama Octode Join Date: Jun 2006 Location: St Osyth, Nr Clacton, Essex, UK. Posts: 1,482	Re: Thandar Function Gen Cutout Mains transformer Thanks Kevin, that's great. Yes I can see the device at the surface. I should have mentioned that the split secondary winding measures 3.8 Ohms one half and 4.4 Ohms the other half. That sounds a bit too much difference to be accounted for by one being wound over the other so I wonder is there are shorted turns in the 3.8 Ohm winding. Graham __________________ Half my stuff is junk - trouble is, I don't know which half!