Quote:
Originally Posted by giraffenigel
It's working! Because of the lack of instructions I had assumed that it was wired the same as the alldav and Dialgizmo as they all look the same - not so! The RJ11 socket is the output and the other end is the input.
I wired a female BT to the 2 terminals inside and an RJ11 to BT plug into the socket and it works perfectly. Remember when wiring the lead that the 2 INSIDE contacts on the RJ11 are the line.
|
I'm confused now.
I originally wired it with the phone connected to L2 and P1 with the line going to the RJ45 socket as that seemed the obvious way, but it did not work. Seeing your post I tried the phone into the RJ45 socket and the line to L2 and P1. It still does not work.
So which is the correct connection? Though whether it really matters I'm not sure as it does not work either way.