Quote:
Originally Posted by Keith
Hi Roger,
My only foray onto 472kHz was using an ART13 with low frequency adaptor. I used a variometer and aerial current meter from a T1154. Had a couple of contacts and even got a mention in Radcom! I just strapped the feeders of my 80m doublet. I think I used a Racal RA17 as the receiver.
|
Hi Keith,
There are still a few people on 472 CW apparently, around 0800 on Sundays. I will see if the TGY2 will work there with my inverted L. The TX has a built-in variometer and was supposed to work into end fed wires on smaller naval vessels. My CR300 seems to work OK on 472 but I may have to make a loop aerial or an ATU for the receiver.
73
Roger/G3VKM