Re: Goblin Teasmade 855 disable alarm
The alarm buzzer is the device bottom centre with a coil of wire in a metal frame. There will be two wires connected to it. You need to disconnect one of them. If you are lucky there will be push-on connectors. Just remove one of them. Wrap the connector thoroughly with two layers of insulating tape, so it cannot come into contact with anything it should not.
Leave a note inside the Teasmade saying where it came from, in case you ever want to reconnect it up in future.
__________________
If I have seen further than others, it is because I was standing on a pile of failed experiments.
|