Re: FM to AM Converter?
Just an update to post #17, for anyone who might wish to go down the PCB route, I've now drawn the PCB artwork for the layout I've devised, which has the correct spacings for vero-pins to mount the FM module. The pads for the switch are to suit the momentary tactile push-button switch that John kindly gave me. It has to be mounted on the underside of the PCB with the tabs bent flat and soldered in place.
As and when I've check the board for errors and etched and built it, I'll add an update.
Meanwhile, it's 'work in progress'!
Hope that's of interest.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
|