UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Alistair D · 18th Feb 2018, 5:10 pm

Glad to hear that it now works after a fashion.

Mine does not have the rod aerial fitted so can't do a comparison. I would expect it to be able to pick up Radio 2, 3, 4 etc on the internal antenna. There is an attenuator switch on the back panel that could set wrongly. Also check that there is continuity from the rod through to the aerial plug.

Al

18th Feb 2018, 5:10 pm	#5
Alistair D Nonode Join Date: Jan 2010 Location: Edinburgh, UK. Posts: 2,008	Re: JIL SX400 Reset Glad to hear that it now works after a fashion. Mine does not have the rod aerial fitted so can't do a comparison. I would expect it to be able to pick up Radio 2, 3, 4 etc on the internal antenna. There is an attenuator switch on the back panel that could set wrongly. Also check that there is continuity from the rod through to the aerial plug. Al __________________ I won't tell you how I discovered that.