Re: Avometer Model 40 Special (7.5mA FSD)
Andy-
I have peered thro' at the edges of the scale plate and there is no part number.
'Accuracy BS1' is written at the lower edge- should that be BSI...?
Micheal-
The range knobs are standard for a Model 40, all the way up to 120v,480v, and 1,200v.
It has no significant advantages over a Model D, although arguably a bit more flexibility on resistance, with 12, 120, and also 1,200 ohms at centre scale with the 9volt internal source.
It's all a bit unusual, instinct has me thinking it's part of a small batch for a particular customer. It has certainly seen a lot of use.
Dave
|