View Single Post
Old 11th Feb 2018, 10:16 pm   #5
wave solder
Hexode
 
wave solder's Avatar
 
Join Date: Feb 2007
Location: Chesterfield, Derbyshire, UK.
Posts: 481
Default Re: Single phase ex-avionics motor start up?!

I would measure the resistance of the windings and work out which is the common wire for the two windings, if the two windings measure the same resistance fit the capacitor between this common point and one of the other wires. Apply the power to the other wire and common.
wave solder is offline