Re: Non-working Commodore PET 3016
[QUOTE=ScottishColin;1345717]OK - 40 pin socket with pins 36-33 folded out sideways. Solder 4.7Ω resistors to each of pins 26-33.
Pins 29, 31 and 33 through individual 4.7Ω resistors to pin 1
Pins 26,27,28,30 and 32 through individual 4.7Ω resistors to pin 8
Then insert 6502 and check pin 9.
Have I got that right?
if so, how should I connect 5 individual resistors to pin 8? Just twist their ends together and insert 1 of the resistors to pin 8?
Colin.
/QUOTE]
Unless you've made some typos, I think they recommended 4k7 = 4.7kΩ resistors rather than 4.7Ω (which wouldn't really serve much purpose being that low).
Although this may not make too much difference, if just going to supply / ground and there's nothing driving to drive out from pins you're trying to pull up / down.
|