Re: Roberts RT7 - problem
On that basis it appears that R26 is 2530 ohms and R27 is 80 ohms. If you retest R27 on the 200 ohm range this should confirm this. Both resistors are off value. R26 will probably be OK, but R27 should be replaced with the nearest available value which is 47 ohms.
C32 appears to be OK. If you test it battery positive to capacitor positive, capacitor negative to meter positive, meter negative to battery negative, meter on 20mA range you should see a high cuurent flow initially which will drop to near zero if the capacitor is OK.
__________________
Graham. Forum Moderator
Reach for your meter before you reach for your soldering iron.
|