View Single Post
Old 8th Feb 2011, 1:40 pm   #56
pitbuell94
Pentode
 
pitbuell94's Avatar
 
Join Date: May 2009
Location: Fresnes, France
Posts: 124
Default Re: 819 line standards convertor.

Hi PPPPenguin and Daryl,

I meet actually a problem concerning simulation of my FIFO.

I'm able to run correctly ISIM in XILINX ISE with all my design but not at all concerning simulation of my FIFO.

In attached document, this is the design of my workbench.

It's not complet=> just clock signal at this moment because nothing run.

I put the same frequency for both clock => RD_clk and WR_clk.

No signal move on the screen.

Do I forget very stupid stimuli

Thank you very much for your help.

Frédéric.
Attached Files
File Type: txt test_bench_fifo.vhd.txt (2.7 KB, 93 views)
pitbuell94 is offline