Re: Capacitor and Output Transformer question for valve amplifier. Philips EV4437a
The capacitor shown in post #4 is C1 a single 16uF unit.
You can see the two 270k anode load resistors for V1, a double triode, connected to the centre tag, so that's obviously the positive connection.
You're going to have to trace the wiring to the other tags to show what the other connections are.
Is the other resistor I can see 1k? It's always difficult reading colour codes from pictures.
__________________
Graham. Forum Moderator
Reach for your meter before you reach for your soldering iron.
|