UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Bikesmilligan · 2nd Aug 2020, 5:22 pm

Hi.
As far as I can tell, this is a C129, autochanger.

My problem is that, the plastic 'Record Size Selector' operating arm, has disengaged from the Record Size Selector mechanism. I have removed the size selector mechanism unit, from the chassis and replaced the arm, where it appears to have lived previously; but it is a 'sloppy' vague kind of fit and it disengages again easily - and there is no obvious anchor-point, for the attached spring, without the spring fouling other moving parts.

If anyone can provide an image/drawing or discription of how it should be connected, I would be very grateful.

Regards

Alan ( and thanks)

2nd Aug 2020, 5:22 pm	#1
Bikesmilligan Diode Join Date: Jun 2020 Location: Exeter, Devonshire, UK. Posts: 8	BSR C129 (?) autochanger Hi. As far as I can tell, this is a C129, autochanger. My problem is that, the plastic 'Record Size Selector' operating arm, has disengaged from the Record Size Selector mechanism. I have removed the size selector mechanism unit, from the chassis and replaced the arm, where it appears to have lived previously; but it is a 'sloppy' vague kind of fit and it disengages again easily - and there is no obvious anchor-point, for the attached spring, without the spring fouling other moving parts. If anyone can provide an image/drawing or discription of how it should be connected, I would be very grateful. Regards Alan ( and thanks) Attached Thumbnails